What are the environment and quality standards for the use of steel -based glass in the building?

  Window is an object that every family must have. No family can have no windows for daily, because the window has an important role in introducing light into the indoor. In addition, it is necessary to serve as insulation, heat insulation, and defending our safety effect. Essence

  In the performance of the window, its safety performance is particularly important. With the increase in the number of new buildings and the increase in technology, the height of the floor is increasing day by day, and the glass is getting larger and larger. What follows is how to ensure the safety of the outer window of the building. More role.

  Principles and advantages of tempered glass

  Steel glass is a safe glass. Glass is actually a prestressed glass. In order to improve the strength of the glass, it is usually used to form compression stress on the surface of the glass. , Enhance the glass anti -wind pressure, cold and summer, impact, etc.

  Compared with ordinary glass, tempered glass has many advantages. The first is that the intensity is several times higher than that of ordinary glass. The second is the safety of use. Fragmentation has greatly reduced the damage to the human body. The resistance to the resistance of tempered glass is 3 to 5 times that of ordinary glass. Generally, it can withstand temperature changes of more than 250 degrees to prevent the heat burst from obvious effects.

  So what are the requirements for my country's tempered glass?

  The national standard specifies the window glass with a single block of 1.5 square meters. The floor -to -ceiling windows with a glass bottom from the final renovation surface must use the national regulations of 7 and 7 floors. The national standard is ≥40 capsules, and the flatness of the single -block of tempered glass is <3 ‰.

  Obviously, for tempered glass, it is necessary for high -level users to use windows, because it is safer, and it is also more flat and visual effects are better.

  Sayyas Standard

  Sayyas has always adhered to the core value of "customer -centric" for many years, and customer security needs to be considered limited. Therefore, Mori Eagle has set another standard higher than the national standard for himself, that is, Sayyas requires that the national standard ≥48 capsules in the range of 50mm*50mm, and the flatness of the single torrent of tempered glass is <1 ‰ (waveform deformation 1 ‰. Gow -shaped deformation 3 ‰).

  In this way, even if the tempered glass is destroyed due to possibility of resistance, the glass used in the Sayyas Aluminum Wood Window will be safer, and the probability of self -explosion will be greatly reduced. When we look outside, the visual effects are visual effects. It will also be better, and this is why the location of the windows see is extra clear through some windows.

  PS: The flatness of the glass means that the surface is not absolutely flat when the glass is processed or produced, and the data that is incorrect and absolutely level is the flatness. (The smaller the value, the better). On the one hand after installation, the steel with poor flatness will cause the reflected optical deformation of the glass, which greatly affects the appearance quality of the doors and windows and curtain walls. Essence