Scw60 Canopy High Window

Sayyas Aluminum-clad Wood Exposed Framing Curtain Wall丨Scw60

Sayyas Scw60 Exposed Framing Curtain Wall was developed and manufactured by Sayyas in 2015, which is the first curtain wall product to pass PHI certification in China. The width of Scw60 frame is consistent in visible surface, providing a wider view for the building.

  • Scw60 detail

    Scw60 detail

  • Scw60 detail

    Scw60 detail

  • Scw60 detail

    Scw60 detail

  • Air tightness

    Air tightness

    Building curtain wall: National standard GB/T21086-2007 Level 4 qL≤0.5[m³/(m·h)]
    (Building curtain wall)
  • Water tightness

    Water tightness

    Adopt stepwise multistage drainage design
    Building curtain wall: National standard GB/T21086-2007 Level 4 1500Pa≤△P<2000Pa
    (Building curtain wall)
  • Thermal insulation performance

    Thermal insulation performance

    Insulation performance of the whole window: Ucw≤0.8W/(㎡·K)
  • Sound insulation performance

    Sound insulation performance

    GB/T8485-2008 building window air sound insulation performance grading standard Level 3
  • High suitability

    High suitability

    It can be combined with other passive product series of Sayyas freely to realize the opening of curtain wall
    It can be designed into arched window, arc window and other types of special-shaped fixed window. Maximize the need of architectural designers for aesthetics
    This provides a perfect solution for the opening over 3m wide.
    The 60mm viewing width provides a wider view of the building
    At the same time, the laminated wood depth of more than 140mm provides enough security for the owner
  • Corrosion resistance

    Corrosion resistance

    Its corrosion resistance in coastal areas exceeds 240 hours of salt spray test requirements
  • Opening method

    Opening method

    Inside opening and pushing, inside pushing and sliding and other opening methods are available
  • Wind load resistance performance

    Wind load resistance performance

    Building curtain wall: National standard GB/T21086-2007 Level 3 2.0kPa≤P3<2.5kPa (building curtain wall standard)

Middle rubber strip

Ring sealing rubber strip without breakpoint is used to improve the air tightness of the whole window

Cold and hot bridge partition

Effectively eliminate cold frame of cavity, and reduce heat transfer coefficient

Stepwise multistage drainage design

Improve the water tightness of the whole window


High transparency offline low-e glass

Standard insulating glass configuration: 6L+16Ar+6L+16Ar+6 high transparency offline low-e glass (Note: tempered according to national standard)

Frame glass thickness reach up to 50mm

It can be configured with electric or manual louvers inside insulating glass, or upgraded into external laminated glass, vacuum glass, etc., to provide more solutions for architectural designers.

Standard warm-edge spacer imported from Europe

    Scw60 Canopy High Window

    Scw60 Canopy High Window




Address of Shuangcheng factory:

Crossroads of Songhuajiang Road and Xing'an Road, New Industrial Park, Shuangcheng Economic Development Zone, Harbin

Address of Haxi factory:

No. 9, Xinnong Road, Nangang District, Harbin


Address of Nanjing factory:

No. 18, Zhonghuan Road, Jiangning District, Nanjing

Address of Nanjing office building:

Building F, Shimao 52 +, Yuhua District, Nanjing


Online Consultation








JD official flagship store

Tmall official flagship store