The national bungee is cooling, the wind hail is arrogant, is your home thawed?

  The repetition of the epidemic is already a bald bald, and it did not expect that the weather in the early summer has also opened "jokes" ...

  In recent days, the temperature of the country has ushered in the rushing temperature, the magnitude is like "one night seasons", of which the individual areas are even hit by the size of the egg size, and countless glass products are ruthless, including vehicle windshields and Window is mainly.

  China Weather Net Meteorological Analyst Stone 石, this cold air is unweight, with three obvious characteristics: one is wide influence, most of my country's Middle Eastern part is affected; the second is a variety of types, bringing wind, cooling, sand Dust, rain and snow weather; third is that the cooling is large, especially the highest temperature and cooling, Shandong, Henan and other places can reach 12-16 ° C, local land 16 ° C or more.

  It can be seen that the impact caused by this cold air is not only very serious, especially the residents' home life and work.

  Building insulation, doors and windows are key

  Today, the heating project in northern my country is close to the end, and the South is not more useful. Therefore, if you want to keep the weather in this over 10 ° C to ensure indoor temperature, more still rely on the natural warmth and mechanical insulation equipment of the building, and the building is naturally warmly welcoming 100% popular.

  So what is the key to building natural warmth? Doors and windows are heavy, and the reasons have the following three points:

  First, the window is different from the wall. The wall will form a whole after completion, but the form is different, the window is made of the casing, the hardware, glass, and the strip, etc., which is inevitable.

  Second, the window is different from the thickness of the wall. The window is always weak, so the heat insulation insulation of the wall is stronger than the window and the wall as a solid state.

  Third, the window is different from the wall of the wall. The heat transfer coefficient of ordinary concrete is 1.28W / m · k, ordinary aluminum alloy door heat transfer factor is approximately 3.5-5.0W / m · k, broken bridge aluminum alloy door heat transfer factor is about 2.5-3.0W / m · K, The heat transfer coefficient of the system aluminum alloy window is about 0.8-2.5 w / m · k. The higher the heat transfer coefficient, the more heat is lost, and it is conceivable to know that the normal wall is more thermally insulating.

  Not to mention that today's new buildings will be treated with the walls, and the thermal insulation of the wall is better. Therefore, if you want to improve the building room insulation, the doors and windows must be critical!

  In other words, replacing a window with better insulation performance, the temperature in the room will be greatly improved, and depending on the form of the form, the configuration is different, the heat preservation effect of the window is also different. Taking the Senhan Classic 1998 aluminum window as an example, the three-cavity glass configuration is applied, and the thermal insulation performance can be 1.6W / m · k or less. The configuration is better after the upgrade is more effective. Thermal effects seem to have a "transparent wall".

  Energy-saving and insulation doors and windows, taking into account security

  Under extreme weather, the weather outside the insulation is also worthy of attention. Most of the high-performance energy-saving dome use multi-layer hollow tempered glass, filling argon, which is higher than that of ordinary glass, which can resist the impact of greater strength, even if it is broken, it will form round pieces, will not hurt people. It also provides a guarantee for home safety under extreme weather.

  For the research and manufacture of high quality energy-saving doors and windows, the Sayyas has had a history of 24 years. It has independent glass deep processing workshops, which must not only complete the tempered, hollow box, etc., which is based on the current national standard, such as national standards. The flatness of the monolithic tempered glass is required <3 ‰, and the ehens can reach <1 ‰ (1 ‰ waveform deformation, 3 ‰ of the bow deformation). The national standard requires that the fragmented national standard is ≥40 grains in the 50mm * 50mm range, and the ehens can reach ≥ 48 capsules, and the safety is higher.

  Moreover, the Sayyas has more than 20 products have obtained PHI certification, and the level of super insulation has been applied to more than 100 national passive near-zero energy consumption projects, providing high energy-saving indoor environment, letting home more green .